Non Skid Cork Backed Stainless Steel Rulers (STAZPUT), Inch & Metric 1/16", mm - 6", 12", 15", 18", 24", 36" and 48" Lengths - Model 200SR
Purchase
Description
Single sided stainless steel rulers with a 'non skid' cork back . The front features inch and metric scales with the smallest graduations of 1/16" and mm. The back of the rulers features a cork backing to prevent skidding and slippage. The cork back also raises the edge of the ruler from the work surface which enable inked lines to be drawn without smudging.
Please note from the picture, the scales on the top and bottom edges of these rulers are reversed so that whichever scale is used, it always is on the top edge and reads correctly from left to right.
A versatile ruler for all applications requiring accurate measurements.
The ends of the rulers have rounded corners for safety and a 1/4” diameter hang hole at one end. The rulers are 1.125"” (28.6mm) wide. Stainless Steel thickness is 0.020” (0.508mm), overall thickness with the cork backing is 0.055" (1.397mm). *** The 48" model, 248SR-48 is made from 0.030" (0.762mm) thick stainless steel, the overall thickness with the cork backing is 0.065" (1.651mm).
These rulers are available in 6”, 12”, 15", 18", 24”, 36” and 48” lengths.
All graduations and markings are etched and black filled.
Historical Model #s: 206, 206SR, 206SR-06, 206SR-06A, 212, 212SR, 212SR-12, 212SR-12A, 215, 215SR, 215SR-15, 215SR-15A, 218, 218SR, 218SR-18, 218SR-18A, 224, 224SR, 224SR-24, 224SR-24A, 236, 236SR, 236SR-36, 236SR-36A, 248, 248SR, 248SR-48, 248SR-48A, STAZPUT.