Printers & Graphic Art Stainless Steel Ruler, Inch & Metric 1/16", 1/32", mm, 0.5mm, pica - 12", 18" & 24" Lengths - Model 1015A
Purchase
Description
Two sided stainless steel rulers featuring measuring scales on all four edges. The front of the ruler has an inch scale in 1/16" (1/32" for the first three inches) and a pica scale numbered every 1 picas with a smallest graduation of 1/2 pica. The back of the ruler has a millimeter scale with a smallest graduation of 1/2mm and a regular millimeter scale with a smallest graduation of 1 mm.
Both millimeter scales are set up to always read correctly from left to right on the top edge of the ruler.
The ends of the rulers have rounded corners for safety and a 1/4” (6.35mm) diameter hang hole at one end. The rulers are 1 1/4” (31.75mm) wide and 0.030” (0.8mm) thick.
These rulers are available in 12”, 18", & 24" lengths.
All graduations and markings are etched and black filled.
Historical Model #s: 1015, 1015A, 1015R, 1015A-12, 1015A-12A, 1015R-12, 1015A-18, 1015A-18A, 1015R-18, 1015A-24, 1015A-24A, 1015R-24