Non Skid Cork Backed Stainless Steel Rulers (STAZPUT), Inch 1/16", 1/32" - 9", 12", 15", 18", 24" & 36" Lengths - Model 100SR

Single sided stainless steel rulers with a 'non skid' cork back . The front features two inch scales with the smallest graduations of 1/16" (the first inch on both scales is graduated to 1/32"). Both scales read on the top edge, one from left to right and one from right to left. The back of the rulers features a cork backing to prevent skidding and slippage. The cork back also raises the edge of the ruler from the work surface which enable inked lines to be drawn without smudging.

Please note from the picture, the scales on the top and bottom edges of these rulers are reversed so that whichever scale is used, it always is on the top edge..

A versatile ruler for all applications requiring accurate measurements.

The ends of the rulers have rounded corners for safety and a 1/4” diameter hang hole at one end. The rulers are 1.125"” (28.6mm) wide. Stainless Steel thickness is 0.020” (0.508mm), overall thickness with the cork backing is 0.055" (1.397mm).

These rulers are available in 9", 12”, 15", 18", 24” & 36” lengths.

All graduations and markings are etched and black filled.

Historical Model #s: 109, 109SR, 109SR-09, 109SR-09A, 112, 112SR, 112SR-12, 112SR-12A, 115, 115SR, 115SR-15, 115SR-15A, 118, 118SR, 118SR-18, 118SR-18A, 124, 124SR, 124SR-24, 124SR-24A, 136, 136SR, 136SR-36A. STAZPUT.